Browsing Orman Endüstri Mühendisliği Bölümü by Title
Now showing items 29-48 of 78
-
The effect of using alum mordant in wild cherry bark dyestuff for the production of UV resistant colored paper
(Drewna Industrija, 2019-12-15)Depending on the use of wood in the forest industry, wood bark is mostly peeled and used as fuel. The ash and smoke left from the burned bark causes environmental pollution. The most environmentally friendly method for ... -
Effect of water repellents on the surface characterisation of scots pine (pinus sylvestris) exposed to accelerated and outdoor weathering
(28th International Conference on Wood Science and Technology, 2017-12-07)Numerous chemicals have been investigated to inhibit photodegradation of wood and to protect it long term against weathering in-service. However, most of these chemicals cannot provide a long-term protection on wooden ... -
The effects of adhesive ratio and pressure time on some properties of oriented strand board
(Bioresources, 2011)This study was carried out to determine the effects of adhesive ratio and pressure time on thickness swelling (TS), internal bond (IB), modulus of rupture (MOR), and modulus of elasticity (MOE) properties of oriented strand ... -
Effects of boron Impregnation and heat treatment on some physical and mechanical properties of spruce and pine wood
(Karadeniz Teknik Üniversitesi, 2010-11-04)This study evaluated the effects of boron impregnation and heat treatment on some physical and mechanical properties of wood. Spruce and pine wood samples were treated with 4% aqueous solution of both boric acid (BA) and ... -
The effects of heat treatment on physical and technological properties and surface roughness of Camiyanı Black Pine (Pinus nigra Arn. subsp. pallasiana var. pallasiana) wood
(Elsevier, 2007-06-28)Heat treatment is often used to improve the dimensional stability of wood. In this study, the effects of heat treatment on physical properties and surface roughness of Camiyanı Black Pine (Pinus nigra Arn. subsp. pallasiana ... -
The effects of lignocellulosic fillers on mechanical, morphological and thermal properties of wood polymer composites
(Drvna Industrija, 2017)The aim of this study was to investigate some of the physical, mechanical, thermal and morphological properties of wood fl our and cellulose fi ber fi lled polypropylene composites. Polypropylene as a polymer matrix and ... -
Effects of nano-zinc oxide based paint on weathering performance of coated wood
(Salzburg University of Applied Sciences, 2014-09-20)Nano-sized zinc oxide (ZnO) was chosen as a suitable candidate for the UV-protection of coatings. The accelerated weathering performances of Scots pine coated with wood paint mixed with nano- ZnO were investigated. Uncoated ... -
The effects of tannin and thermal treatment on physical and mechanical properties of laminated chestnut wood composites
(Bioresources, 2011)The aim of this study was to investigate the effects of tannin and thermal treatment on physical properties such as dimensional stability and moisture content (%), as well as mechanical properties such as bending strength, ... -
The effects of thermal treatment on the mechanical properties of wild Pear (Pyrus elaeagnifolia Pall.) wood and changes in physical properties
(Materials & Design, 2009-12-01)The aim of the study was to investigate the effects of thermal treatment on the mechanical and physical properties of wild pear wood. The results obtained for thermal treatment at 160 C for 2 h showed that the modulus ... -
Endüstriyel ölçekte ısıl işlem uygulanan bazı odun örneklerinde vida tutma direnci ve mantar çürüklük testi performansı
(2013-04-13)Günümüzde alternatif bir odun koruma yöntemi olarak değerlendirilen ısıl işlem oduna boyut stabilizasyonu kazandırmak ve tahrip edici organizmalara karşı odunun biyolojik direncini artırmak gibi önemli amaçlara yönelik ... -
Energy sources, part a: recovery, utilization, and environmental effects
(Taylor & Francis, 2009-01-01)Wood pellets are an economic, sustainable, and environmentally friendly alternative to the fossil fuels available. Both new and residual wood is used to supply the pellet production, and new raw material resources are ... -
Forecasting Turkey’s lumber industry: an analysis
(African Journal of Business Management, 2012-03-14)In this study, models are established and projections are developed for production, import and export of Turkish Lumber manufacturing industry by econometric method. Parameters of the econometric modeling rest on time ... -
Fungal inhibition and chemical characterization of wood treated with novel polystyrene-soybean oil copolymer containing silver nanoparticles
(Elsevier, 2018-06-28)In this study, Scots pine (Pinus sylvestris L.) samples were impregnated with autoxidized soybean oil polymer containing Ag nanoparticles (Agsbox) and polystyrene-soybean oil copolymer (AgPSsb) in order to inhibit ... -
Heat treated wood–nylon 6 composites
(Elsevier, 2014-09-03)Heat treatment is a relatively benign modification method that is growing as an industrial process to improve hygroscopicity, dimensional stability and biological resistance of lignocellulosic fillers. There also has ... -
The impact of nanoparticles and moisture content on bonding strength of urea formaldehyde resin adhesive
(Drvna Industrija, 2018)Wood and wood products have been used in different environmental conditions. Moisture content (MC) and relative humidity (RH) are key parameters for these conditions and bonding strength. Nanotechnology has paved the way ... -
The impacts of heat treatment on lap joint shear strength of black pine wood
(Taylor & Francis, 2010-09-02)This study was conducted to determine the impacts of heat treatment on lap shear strength, density, and mass loss of black pine wood. In the study, black pine wood boards bonded with polyurethane were subjected to ... -
Improvement of fire performance of impregnated wood with copper based chemicals
(28th International Conference on Wood Science and Technology, 2017-12-07)Copper is among the most commonly used substances in impregnating industry due to its high toxicity against fungi at last 50 years. Copper-azole (CuA) and ammonical copper quaternary (ACQ) are the most widely used, because ... -
Improving the performance of scotch pine (pinus sylvestris) wood surface
(Northern European Network for Wood Sciences and Engineering, 2015-09-25)In this study, the influence of wood stain (WS) and zinc (Zn) particles applied by a plasma process at atmospheric pressure against UV light was investigated. Scots Pine (Pinus sylvestris L.) specimens were prepared from ... -
The influence of mass loss on the mechanical properties of heat-treated black pine wood
(Wood Research, 2009)Heat has been a method used to dry and modify the properties of wood since ancient times. Nowadays, heat is used as industrial processes for the same reason. Treatment at temperatures above 150°C can change the color of ... -
Influence of micro- and nanonatural fillers on mechanical and physical properties of foamed sma composites
(Taylor & Francis, 2015-03-25)This study is to investigate the reinforcing effects of fillers on mechanical and physical properties of foamed styrene-maleic anhydride (SMA) composites. According to the results, the best foaming was determined for ...