Ara
Toplam kayıt 10, listelenen: 1-10
Anatomy of wooden core of Ottoman composite archery bows
(Sains Malaysiana, 2013)
Composite archery bows have been well known and used by Asiatic societies for thousands of years. The Turkish composite bow, made of wood, horn, sinew and glue is one of the most famous and powerful bows in the world. ...
Surface characterization of weathered and heat-treated woodbased composites reinforced by styrene maleic anhydride
(Color Research and Application, 2019-09-20)
The aim of this study was to investigate the effect of heat-treated lignocellulosic filler
on the surface characteristics and decay resistance of the wood flour/styrene maleic
anhydride (SMA) composites. In this study, ...
The effect of using alum mordant in wild cherry bark dyestuff for the production of UV resistant colored paper
(Drewna Industrija, 2019-12-15)
Depending on the use of wood in the forest industry, wood bark is mostly peeled and used as fuel.
The ash and smoke left from the burned bark causes environmental pollution. The most environmentally friendly
method for ...
Effect of heat treatment of wild cherry wood on abrasion resistance and withdrawal capacity of screws
(Drvna Industrija, 2015-11-06)
In its wise use, many properties of wood are important. Among these properties, wood abrasion
resistance (AR) and withdrawal capacity of screws (WCS) are deemed to be relatively signifi cant. It is well know
that heat ...
Changes in the chemical structure of thermally treated wood
(Bioresource Technology, 2010)
Changes in the chemical structure of hornbeam and uludag fir woods during thermal treatment were investigated at three temperatures (170, 190, and 210 oC) and three durations (4, 8, and 12 hours). After thermal treatment, ...
The effect of heat treatment on some mechanical properties and color changes of Uludag fir wood
(Taylor & Francis, 2010-03-08)
In this study, the effects of heat treatment on color, mass loss,
compression strength, and hardness of Uludag fir (Abies bornmulleriana
Mattf.) were investigated. Wood specimens conditioned at
a relative humidity of ...
The impacts of heat treatment on lap joint shear strength of black pine wood
(Taylor & Francis, 2010-09-02)
This study was conducted to determine the impacts of heat treatment on lap shear
strength, density, and mass loss of black pine wood. In the study, black pine wood
boards bonded with polyurethane were subjected to ...
Surface characterization of wood treated with boron compounds combined with water repellents
(Wiley, 2019-04-15)
Longer weathering exposure periods are more reliable for end-use performance evaluations
of wood surfaces. This study aimed to investigate the effect of boron impregnation
on the surface composition and color of Scots ...
The influence of thermal treatment on color response of wood materials
(Wiley Periodicals, 2010-08-11)
In this study, the influence of thermal treatment on color changes of six different wood materials was investigated. Test specimens were subjected to three different temperatures (160, 180, and 200°C) and durations (3, 5, ...
Physical, biological and chemical characterisation of wood treated with silver nanoparticles
(Springer, 2019-04-15)
Nowadays, environmentally friendly processes
are of great interest and are considerably
needed due to the environmental pollution seems to be
a problem worldwide. For this reason, in this study,
silver nanoparticles ...