Confirmation of the experimentally measured cooling time of Polyethylene Terephthalate (PET) melt by ANSYS and FORTRAN

Basit Öğe Kaydı
dc.contributor.authorDemirel, Bilal
dc.contributor.authorDanacı, Mustafa
dc.contributor.authorAkkurt, Fatih
dc.contributor.authorYaraş, Ali
dc.contributor.authorYaraş, Ali
dc.date.accessioned2025-10-18T08:19:25Z
dc.date.created2021
dc.date.issued2021
dc.departmentFakülteler, Mühendislik Mimarlık ve Tasarım Fakültesi, Metalurji ve Malzemem Mühendisliği Bölümü
dc.description.abstractThis study deals with confirmation of the experimentally measured cooling/solidification time of the Polyethylene Terephthalate (PET) melt by ANSYS and FORTRAN analysis programs. Therefore, a new code was written and run by using FORTRAN programming. With the ANSYS Thermal Transient module, cooling time and the injection conditions of PET into a cylindrical mold were simulated. Then, the experimental results and the analysis data were compared. It was determined that the results are in good agreement (100%) in case of heat capacity (Cp) value is chosen depending on the temperature. The results show that the proposed new codes will contribute to the optimization of cooling/solidification time for industrial scale PET production.
dc.identifier.doi10.25092/baunfbed.867386
dc.identifier.endpage830
dc.identifier.issn1301-7985
dc.identifier.issn2536-5142
dc.identifier.issue2
dc.identifier.startpage819
dc.identifier.trdizinid437598
dc.identifier.urihttps://search.trdizin.gov.tr/tr/yayin/detay/437598
dc.identifier.urihttps://doi.org/10.25092/baunfbed.867386
dc.identifier.urihttps://hdl.handle.net/11772/17235
dc.identifier.volume23
dc.indekslendigikaynakTR-Dizin
dc.language.isoen
dc.relation.ispartofBalıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzTR-Dizin_20251017
dc.subjectBilgisayar Bilimleri
dc.subjectYazılım Mühendisliği
dc.subjectMühendislik
dc.subjectKimya
dc.subjectPolyethylene Terephthalate (PET)
dc.subjectsolidification time
dc.subjectcooling time
dc.subjectFORTRAN
dc.subjectANSYS.
dc.titleConfirmation of the experimentally measured cooling time of Polyethylene Terephthalate (PET) melt by ANSYS and FORTRAN
dc.typeArticle
dspace.entity.typePublication
relation.isAuthorOfPublication58d7c06e-c79d-4315-b765-30c20697856b
relation.isAuthorOfPublication.latestForDiscovery58d7c06e-c79d-4315-b765-30c20697856b

Dosyalar

Orijinal paket

Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
17235.pdf
Boyut:
810.3 KB
Biçim:
Adobe Portable Document Format
İndir

Koleksiyon

TR-Dizin İndeksli Yayınlar Koleksiyonu