Influence of Al and Ti elements on the microstructure and properties of crnifecoalxtiy heas fabricated by ECAS

Basit Öğe Kaydı
dc.contributor.authorErdoğan, Azmi
dc.contributor.authorZeytin, Sakin
dc.contributor.authorErdoğan, Azmi
dc.date.accessioned2025-10-18T09:15:31Z
dc.date.created2016
dc.date.issued2016
dc.departmentFakülteler, Mühendislik Mimarlık ve Tasarım Fakültesi, Metalurji ve Malzemem Mühendisliği Bölümü
dc.descriptionProceedings of the 2nd World Congress on Mechanical, Chemical, and Material Engineering, MCM 2016 -- Budapest -- 139568
dc.description.abstractCrNiFeCoAl<inf>x</inf>Ti<inf>y</inf> alloy series which fabricated by ECAS, were investigated in view of microstructure and microhardness properties. The differences were determined by changing Al and Ti ratios. The alterations on microstructure and microhardness values were determined by apply homogenization heat treatment. According to the results sintering process was successfully performed in a short time. Diffusion activities as well as interfusion of powders were observed in the microstructures following the sintering process. The bright phase has high Fe and Cr content, while the gray phase holds high Al, Ni and Ti content. Diffusion processes ended by homogenization and obtained more homogeneous distribution. The high microhardness values which obtained by sintering were raised further. © 2018 Elsevier B.V., All rights reserved.
dc.identifier.doi10.11159/mmme16.135
dc.identifier.isbn9781927877173
dc.identifier.isbn9781990800108
dc.identifier.isbn9781990800443
dc.identifier.isbn9781927877616
dc.identifier.isbn9781927877326
dc.identifier.isbn9781990800276
dc.identifier.isbn9781927877272
dc.identifier.issn2369-8136
dc.identifier.scopus2-s2.0-85045017587
dc.identifier.scopusqualityN/A
dc.identifier.urihttps://doi.org/10.11159/mmme16.135
dc.identifier.urihttps://hdl.handle.net/11772/19022
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherAvestia Publishing info@avestia.com
dc.relation.ispartofProceedings of the World Congress on Mechanical, Chemical, and Material Engineering
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzScopus_20251016
dc.subjectEcas
dc.subjectEntalpy
dc.subjectEntropy
dc.subjectHea
dc.subjectMicrostructure
dc.titleInfluence of Al and Ti elements on the microstructure and properties of crnifecoalxtiy heas fabricated by ECAS
dc.typeConference Object
dspace.entity.typePublication
relation.isAuthorOfPublication751e67bb-63af-4071-ab13-c04238a2fef5
relation.isAuthorOfPublication.latestForDiscovery751e67bb-63af-4071-ab13-c04238a2fef5

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu