Expanded polistiren sert köpük (EPS) malzemesinin kiremit olarak kullanılabilirliğinin incelenmesi

dc.contributor.advisorDemirel, Bilal
dc.contributor.authorAtay, Nuray
dc.date.accessioned2025-10-16T20:15:49Z
dc.date.created2011
dc.date.issued2011
dc.departmentEnstitüler, Lisansüstü Eğitim Enstitüsü, Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı
dc.description.abstractÇatı kaplama malzemelerinde yoğunluğun düşük olması ve su geçirme özelliğinin olmaması, yüksek sıcaklığa ve düşük sıcaklığa dayanıklı, mekanik mukavemeti yüksek ve iyi izolasyonlu olması istenir. Bu çalışmada, bir çatı kaplama malzemesi olan expanded polistiren (EPS) sert köpük malzemesinin kiremit olarak kullanılabilirliği incelenmiştir. Expanded polistiren sert köpüklü kiremide yapılan fiziksel ve mekanik testler sonuçlarına göre yapılarda güvenle kullanılabilir olduğu sonucuna varılmıştır. Ayrıca EPS sert köpüklü kiremit üretim aşamasında özel bir harçla kaplanması gerekmektedir. Bu özel harç daha da geliştirilerek ürünün su emme oranı düşürülebilir, dona dayanıklılık artırılabilir, daha iyi ısı ve ses izolasyonu sağlanabilir. Bununla birlikte değişik kiremit dizaynları denenerek mekanik dayanımı maksimum kılacak en uygun kiremit dizaynı seçilebilir.
dc.description.abstractRoof covering materials are desired to have excellent properties such as low density, water-proof, fire resistant and heat insulation. In this study, studies were carried out on the tile being in plan to produce with Expanded polystyrene (EPS) that is a roof covering material. It is concluded that EPS tile can be used safely in buildings as a roof covering material according to the physical and mechanical test results. In addition, this tile made of EPS should be plastered with a special chemical mortar during production, by which water absorption capacity can be decreased, freeze and thaw resistance being increased and better heat and sound insulation being obtained by further improving this plastering material. Mechanical strength of this tile can be improved modifying its design.
dc.identifier.endpage94
dc.identifier.startpage1
dc.identifier.urihttps://tez.yok.gov.tr/UlusalTezMerkezi/TezGoster?key=zqI_ZOq-b18GC2rT9c2JGq2ECPaP0eT0nsYeFue-dYNZApspEtuv0tr5gD32Ogd9
dc.identifier.urihttps://hdl.handle.net/11772/16728
dc.identifier.yoktezid294973
dc.institutionauthorAtay, Nuray
dc.language.isotr
dc.publisherBartın Üniversitesi, Lisansüstü Eğitim Enstitüsü
dc.relation.publicationcategoryTez
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_TEZ_20251016
dc.subjectMetalurji Mühendisliği
dc.subjectMetallurgical Engineering
dc.titleExpanded polistiren sert köpük (EPS) malzemesinin kiremit olarak kullanılabilirliğinin incelenmesi
dc.title.alternativeTile production of expanded polystyrene (EPS) foam
dc.typeMaster Thesis
dspace.entity.typePublication

Dosyalar