Ara
Toplam kayıt 24, listelenen: 11-20
Changes in the chemical structure of thermally treated wood
(Bioresource Technology, 2010)
Changes in the chemical structure of hornbeam and uludag fir woods during thermal treatment were investigated at three temperatures (170, 190, and 210 oC) and three durations (4, 8, and 12 hours). After thermal treatment, ...
The effect of heat treatment on some mechanical properties and color changes of Uludag fir wood
(Taylor & Francis, 2010-03-08)
In this study, the effects of heat treatment on color, mass loss,
compression strength, and hardness of Uludag fir (Abies bornmulleriana
Mattf.) were investigated. Wood specimens conditioned at
a relative humidity of ...
Investigating changes in the chemical constituents and dimensional stability of heat-treated hornbeam and Uludag fir wood
(Bioresources, 2011)
Changes in chemical constituents and some physical properties such as
swelling and water absorption of hornbeam (Carpinus betulus L) and
uludag fir (Abies bornmulleriana Mattf.) wood were investigated after
heat treatment ...
The impacts of heat treatment on lap joint shear strength of black pine wood
(Taylor & Francis, 2010-09-02)
This study was conducted to determine the impacts of heat treatment on lap shear
strength, density, and mass loss of black pine wood. In the study, black pine wood
boards bonded with polyurethane were subjected to ...
The effects of thermal treatment on the mechanical properties of wild Pear (Pyrus elaeagnifolia Pall.) wood and changes in physical properties
(Materials & Design, 2009-12-01)
The aim of the study was to investigate the effects of thermal treatment on the mechanical and physical
properties of wild pear wood. The results obtained for thermal treatment at 160 C for 2 h showed that
the modulus ...
The influence of mass loss on the mechanical properties of heat-treated black pine wood
(Wood Research, 2009)
Heat has been a method used to dry and modify the properties of wood since ancient times.
Nowadays, heat is used as industrial processes for the same reason. Treatment at temperatures
above 150°C can change the color of ...
Physical, morphological properties and raman spectroscopy of chestnut blight diseased castanea sativa mill. wood
(SCIELO, 2016)
In this study, some of the physical and anatomical properties of Chestnut
Blight Diseased (CBD) wood were investigated, and the study also included observations
using Raman spectroscopy. The objective of these investigations ...
The influence of thermal treatment on color response of wood materials
(Wiley Periodicals, 2010-08-11)
In this study, the influence of thermal treatment on color changes of six different wood materials was investigated. Test specimens were subjected to three different temperatures (160, 180, and 200°C) and durations (3, 5, ...
Mechanical, morphological and thermal properties of nano-boron nitride treated wood materials
(Maderas. Ciencia y Tecnología, 2016)
Thermal instability is the one of the most important disadvantages of wood since it begins to
decompose at a low temperature (˃110 °C). Many scientists, past and present, have conducted studies
aimed at improving the ...
Characterization and elemental analysis of wood pellets obtained from low-valued types of wood
(Taylor & Francis, 2016)
In this study, we compared the quality of wood pellets obtained from
several different raw materials, i.e., Rhododendron ponticum (Type 1),
Laurus nobilis (Type 2), and Castanea sativa (Type 3). The quality of the
wood ...