Basit öğe kaydını göster

dc.contributor.authorSözen, Eser
dc.contributor.authorAydemir, Deniz
dc.contributor.authorZor, Mustafa
dc.date.accessioned2019-07-05T06:06:50Z
dc.date.available2019-07-05T06:06:50Z
dc.date.issued2017
dc.identifier.citationSozen, E., Aydemir, D., & Zor, M. (2017). The effects of lignocellulosic fillers on mechanical, morphological and thermal properties of wood polymer composites. Drvna industrija: Znanstveni časopis za pitanja drvne tehnologije, 68(3), 195-204.en_US
dc.identifier.urihttps://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=275758
dc.identifier.urihttp://hdl.handle.net/11772/1600
dc.description.abstractThe aim of this study was to investigate some of the physical, mechanical, thermal and morphological properties of wood fl our and cellulose fi ber fi lled polypropylene composites. Polypropylene as a polymer matrix and wood fl our and cellulose fi bers were used as reinforcing fi llers to prepare the composites by using a single screw extruder. Physical properties such as density, mechanical properties such as fl exure strength and fl exure modulus, tensile strength and tensile modulus, and impact strength, thermal behavior with thermogravimetric analysis (TGA/DTA), and morphological characterization with scanning electron microscopy (SEM) of the composites were determined. The density of the composites was found to increase with the addition of fi llers. The mechanical properties of the composites showed that the fl exure and tensile strength for the composites with wood fl our was higher than the composites with cellulose fi bers, whereas fl exure and tensile modulus, and impact strength for the composites with cellulose fi bers was found to have higher values as compared to the composites with wood fl our. SEM pictures showed that particles and fi bers dispersed to different locations in polypropylene matrix. According to the TGA results, thermal degradation of all the composites was found to be lower compared to neat polymer.en_US
dc.description.sponsorshipThis study was supported by Bartin University, Scientifi c Research Projects Commission (Project No: 2013.1.90). The authors would like to thank the Scientifi c Research Projects Commission for providing the fi nancial support.en_US
dc.language.isoengen_US
dc.publisherDrvna Industrijaen_US
dc.relation.isversionof10.5552/drind.2017.1709en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectWood polymer compositesen_US
dc.subjectNatural fi llersen_US
dc.subjectMechanical propertiesen_US
dc.subjectMorphological characterizationen_US
dc.subjectThermal stabilityen_US
dc.titleThe effects of lignocellulosic fillers on mechanical, morphological and thermal properties of wood polymer compositesen_US
dc.title.alternativeUčinci lignoceluloznih punila na mehanička, morfološka i toplinska svojstva drvno-plastičnih kompozitaen_US
dc.typearticleen_US
dc.relation.journalDrvna Industrijaen_US
dc.contributor.departmentBartın Üniversitesi, Orman Fakültesi, Orman Endüstri Mühendisliğien_US
dc.identifier.volume68en_US
dc.identifier.issue3en_US
dc.identifier.startpage195en_US
dc.identifier.endpage204en_US


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster