Show simple item record

dc.contributor.authorSarac, Umut
dc.contributor.authorBaykul, M. Celalettin
dc.contributor.authorUguz, Yasin
dc.date.accessioned2020-02-05T10:46:59Z
dc.date.available2020-02-05T10:46:59Z
dc.date.issued2015
dc.identifier.urihttp://hdl.handle.net/11772/2505
dc.description.abstractElectrodeposited Ni–Co nanocrystalline thin films were grown onto indium tin oxide (ITO)-coated glass substrates from an electrolyte consisting of their sulfate salts and boric acid without stirring at ambient temperature. The effect of applied current density on the microstructural, compositional, magnetic, and morphological properties was investigated using different characterization techniques such as X-ray diffraction (XRD), energy dispersive X-ray (EDX) spectroscopy, vibrating sample magnetometer (VSM), and scanning electron microscopy (SEM). It was observed that the Ni content within the films increases as the applied current density increases. X-ray diffraction (XRD) analyses of Ni–Co films showed the formation of single phase face-centered cubic (FCC) structure and <111>crystallographic orientation. Morphological characterizations revealed that the applied current density affects the surface morphology of the films. The film electrodeposited at high current density has smaller grains than those prepared at lower current densities. Magnetic measurements showed that the coercivity field and remanence ratio of the films decrease as the applied current density increases. Consequently, Ni–Co thin films exhibited different microstructural, compositional, magnetic, and morphological properties according to current density applied during electroplating process.en_US
dc.language.isoengen_US
dc.publisherSpringeren_US
dc.relation.isversionof10.1007/s10948-014-2862-zen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectElectrodeposited Ni–Co thin filmsen_US
dc.subjectMorphological propertiesen_US
dc.subjectMagnetic characterizationen_US
dc.subjectMicrostructural propertiesen_US
dc.subjectCurrent densityen_US
dc.titleThe influence of applied current density on microstructural, magnetic, and morphological properties of electrodeposited nanocrystalline ni–co thin filmsen_US
dc.typearticleen_US
dc.relation.journalJournal of Superconductivity and Novel Magnetismen_US
dc.contributor.departmentBartın Üniversitesi, Eğitim Fakültesi, Matematik ve Fen Bilimleri Eğitimi Bölümüen_US
dc.identifier.volume28en_US
dc.identifier.startpage1041en_US
dc.identifier.endpage1045en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record