Ara
Toplam kayıt 31, listelenen: 11-20
The effect of mass loss on mechanic properties of heat-treated paulownia wood
(Wood Research, 2009)
In this study, the eff ect of mass loss on mechanic properties of Paulownia (Paulownia
elongata) wood was investigated. For this study, three diff erent temperatures (160, 180, and
200oC) and durations (3, 5, and 7 hours) ...
The effect of treatment time on dimensionally stability, moisture content and mechanical properties of heat treated anatolian chestnut (Castanea sativa Mill.) wood
(Wood Research, 2009)
In this study, the effect of treatment time on dimensional stability, moisture content, and mechanical properties of heat-treated Anatolian chestnut (Castanea sativa Mill.) were investigated. Test specimens were subjected ...
The density, compression strength and surface hardness of heat treated hornbeam (carpinus betulus ) wood
(Maderas. Ciencia y tecnología, 2009-02-13)
The heat treatment of wood is an environment-friendly method for wood preservation. The heat
treatment process only uses steam and heat, and no chemicals or agents are applied to the material
during the process. Tests ...
Changes in the chemical structure of thermally treated wood
(Bioresource Technology, 2010)
Changes in the chemical structure of hornbeam and uludag fir woods during thermal treatment were investigated at three temperatures (170, 190, and 210 oC) and three durations (4, 8, and 12 hours). After thermal treatment, ...
Weathering performance of wood treated with copper azole and water repellents
(2017-09-20)
Water borne wood preservatives have been widely used for a long time in the protection of wood either in ground contact or above ground. Copper is still major biocide component used today in treatment plant for wood ...
The effect of heat treatment on some mechanical properties and color changes of Uludag fir wood
(Taylor & Francis, 2010-03-08)
In this study, the effects of heat treatment on color, mass loss,
compression strength, and hardness of Uludag fir (Abies bornmulleriana
Mattf.) were investigated. Wood specimens conditioned at
a relative humidity of ...
Investigating changes in the chemical constituents and dimensional stability of heat-treated hornbeam and Uludag fir wood
(Bioresources, 2011)
Changes in chemical constituents and some physical properties such as
swelling and water absorption of hornbeam (Carpinus betulus L) and
uludag fir (Abies bornmulleriana Mattf.) wood were investigated after
heat treatment ...
The effect of nano tio2 and nano boron nitride on mechanical, morphological and thermal properties of wf/pp composites
(Drvna Industrija, 2018)
This study evaluated the effect of nano boron nitride (BN) and nano titanium dioxide (TiO2 ) on
some physical, mechanical and thermal properties of WF/PP composites. Polyproplene as a polymer matrix and
wood fl our ...
The impacts of heat treatment on lap joint shear strength of black pine wood
(Taylor & Francis, 2010-09-02)
This study was conducted to determine the impacts of heat treatment on lap shear
strength, density, and mass loss of black pine wood. In the study, black pine wood
boards bonded with polyurethane were subjected to ...
The effects of thermal treatment on the mechanical properties of wild Pear (Pyrus elaeagnifolia Pall.) wood and changes in physical properties
(Materials & Design, 2009-12-01)
The aim of the study was to investigate the effects of thermal treatment on the mechanical and physical
properties of wild pear wood. The results obtained for thermal treatment at 160 C for 2 h showed that
the modulus ...