Ara
Toplam kayıt 81, listelenen: 21-30
Changes in specific gravity and equilibrium moisture content in heat-treated fir (abies nordmanniana subsp. bornmülleriana mattf.) wood
(Taylor & Francis, 2008-09-01)
The goal of this study was to determine the changes in specific
gravity and equilibrium moisture content of fir (Abies nordmanniana
subsp. bornmu¨ lleriana Mattf.) wood after heat treatment at different
temperatures and ...
Balistik panel ve koruyucu zırh üretiminde kullanılan lif ve kompozit malzemeler
(Bartın Orman Fakültesi Dergisi, 2016)
Her canlı varlık, dışarıdan gelebilecek saldırılara karşı içgüdüsel olarak korunma ihtiyacı hissetmektedir.
Insanoğlu da tarih boyunca çevresel faktörlere karşı önlem aldığı gibi, düşmanlardan gelebilecek saldırılara ...
Accelerated weathering performance of impregnated wood samples coated with zinc by means of plasma-assisted particle deposition
(The International Research Group On Wood Protection, 2016-05-15)
Many different methods are currently applied for wood protection against outdoor conditions. The most important of these is the process of impregnation with liquid substances. However, this kind of wood preservatives cannot ...
Determination of shear strength and fire performance of plywood supported by woven E-glass fiber
(Journal of Multidisciplinary Engineering Science and Technology, 2016)
The aim of this study was to determine
the shear strength and fire performance of beech
(Fagus orientalis) plywood supported (SP) by woven E -
glass fiber (WGF). After providing 1.5 mm thickness
beech veneers from a ...
Influence of micro- and nanonatural fillers on mechanical and physical properties of foamed sma composites
(Taylor & Francis, 2015-03-25)
This study is to investigate the reinforcing effects of fillers on
mechanical and physical properties of foamed styrene-maleic anhydride
(SMA) composites. According to the results, the best foaming
was determined for ...
Improvement of fire performance of impregnated wood with copper based chemicals
(28th International Conference on Wood Science and Technology, 2017-12-07)
Copper is among the most commonly used substances in impregnating industry due to its high toxicity
against fungi at last 50 years. Copper-azole (CuA) and ammonical copper quaternary (ACQ) are the
most widely used, because ...
The effects of heat treatment on physical and technological properties and surface roughness of Camiyanı Black Pine (Pinus nigra Arn. subsp. pallasiana var. pallasiana) wood
(Elsevier, 2007-06-28)
Heat treatment is often used to improve the dimensional stability of wood. In this study, the effects of heat treatment on physical
properties and surface roughness of Camiyanı Black Pine (Pinus nigra Arn. subsp. pallasiana ...
Determination of strain distributions of solid wood and plywood in bending test by digital image correlation
(Kastamonu Üniversitesi, 2017)
Aim of study: In this study, it is aimed to compare displacement and strain fields of the plywood obtained from fagus coverings, oak (Quecus robur) and beech (Fagus orientalis L.) by digital image correlation method.
Material ...
Improving the performance of scotch pine (pinus sylvestris) wood surface
(Northern European Network for Wood Sciences and Engineering, 2015-09-25)
In this study, the influence of wood stain (WS) and zinc (Zn) particles applied by a plasma process at atmospheric pressure against UV light was investigated. Scots Pine (Pinus sylvestris L.) specimens were prepared from ...
The effects of lignocellulosic fillers on mechanical, morphological and thermal properties of wood polymer composites
(Drvna Industrija, 2017)
The aim of this study was to investigate some of the physical, mechanical, thermal and morphological
properties of wood fl our and cellulose fi ber fi lled polypropylene composites. Polypropylene as a polymer
matrix and ...