Ara
Toplam kayıt 7, listelenen: 1-7
Natural fillers-filled styrene maleic anhydride copolymer composites
(Wood Research, 2015)
The aim of this study was to determine morphological characterization, mechanical properties
and thermal stability of natural fillers-filled styrene maleic anhydride (SMA) copolymer
composites. SMA and natural fillers ...
The effect of mass loss on mechanic properties of heat-treated paulownia wood
(Wood Research, 2009)
In this study, the eff ect of mass loss on mechanic properties of Paulownia (Paulownia
elongata) wood was investigated. For this study, three diff erent temperatures (160, 180, and
200oC) and durations (3, 5, and 7 hours) ...
The effect of treatment time on dimensionally stability, moisture content and mechanical properties of heat treated anatolian chestnut (Castanea sativa Mill.) wood
(Wood Research, 2009)
In this study, the effect of treatment time on dimensional stability, moisture content, and mechanical properties of heat-treated Anatolian chestnut (Castanea sativa Mill.) were investigated. Test specimens were subjected ...
The effects of adhesive ratio and pressure time on some properties of oriented strand board
(Bioresources, 2011)
This study was carried out to determine the effects of adhesive ratio and pressure time on thickness swelling (TS), internal bond (IB), modulus of rupture (MOR), and modulus of elasticity (MOE) properties of oriented strand ...
The effects of thermal treatment on the mechanical properties of wild Pear (Pyrus elaeagnifolia Pall.) wood and changes in physical properties
(Materials & Design, 2009-12-01)
The aim of the study was to investigate the effects of thermal treatment on the mechanical and physical
properties of wild pear wood. The results obtained for thermal treatment at 160 C for 2 h showed that
the modulus ...
Nanocomposites of polypropylene/nano titanium dioxide: effect of loading rates of nano titanium dioxide
(Materials Science, 2016-09-01)
TiO2 filled Polypropylene (PP) nanocomposites were prepared with a single screw extruder and then by injection molding of the blends. Water absorption, density, mechanical properties, morphological characterization, FTIR ...
The effects of tannin and thermal treatment on physical and mechanical properties of laminated chestnut wood composites
(Bioresources, 2011)
The aim of this study was to investigate the effects of tannin and thermal treatment on physical properties such as dimensional stability and moisture content (%), as well as mechanical properties such as bending strength, ...