Ara
Toplam kayıt 44, listelenen: 21-30
The effect of using alum mordant in wild cherry bark dyestuff for the production of UV resistant colored paper
(Drewna Industrija, 2019-12-15)
Depending on the use of wood in the forest industry, wood bark is mostly peeled and used as fuel.
The ash and smoke left from the burned bark causes environmental pollution. The most environmentally friendly
method for ...
The effects of adhesive ratio and pressure time on some properties of oriented strand board
(Bioresources, 2011)
This study was carried out to determine the effects of adhesive ratio and pressure time on thickness swelling (TS), internal bond (IB), modulus of rupture (MOR), and modulus of elasticity (MOE) properties of oriented strand ...
Effect of heat treatment of wild cherry wood on abrasion resistance and withdrawal capacity of screws
(Drvna Industrija, 2015-11-06)
In its wise use, many properties of wood are important. Among these properties, wood abrasion
resistance (AR) and withdrawal capacity of screws (WCS) are deemed to be relatively signifi cant. It is well know
that heat ...
Changes in the chemical structure of thermally treated wood
(Bioresource Technology, 2010)
Changes in the chemical structure of hornbeam and uludag fir woods during thermal treatment were investigated at three temperatures (170, 190, and 210 oC) and three durations (4, 8, and 12 hours). After thermal treatment, ...
Statistical analysis and projection of wood veneer industry in Turkey: 2007 - 2021
(Scientific Research and Essays, 2011-08-11)
While development and change of the social life in recent years has noticeably increased demand for forest products, the production, export and import of the forest products accordingly changed in terms of quantity and ...
Weathering performance of wood treated with copper azole and water repellents
(2017-09-20)
Water borne wood preservatives have been widely used for a long time in the protection of wood either in ground contact or above ground. Copper is still major biocide component used today in treatment plant for wood ...
The effect of heat treatment on some mechanical properties and color changes of Uludag fir wood
(Taylor & Francis, 2010-03-08)
In this study, the effects of heat treatment on color, mass loss,
compression strength, and hardness of Uludag fir (Abies bornmulleriana
Mattf.) were investigated. Wood specimens conditioned at
a relative humidity of ...
The effect of different nanoparticles and open time on bonding strength of poly (vinyl acetate) adhesive
(Elsevier, 2016)
Nanotechnology is one of the major technologies through in this century. Nano particles
are an important part of this technology. Properties of many traditional materials can be
changed by using the nanoparticles. Open ...
Investigating changes in the chemical constituents and dimensional stability of heat-treated hornbeam and Uludag fir wood
(Bioresources, 2011)
Changes in chemical constituents and some physical properties such as
swelling and water absorption of hornbeam (Carpinus betulus L) and
uludag fir (Abies bornmulleriana Mattf.) wood were investigated after
heat treatment ...
The effect of nano tio2 and nano boron nitride on mechanical, morphological and thermal properties of wf/pp composites
(Drvna Industrija, 2018)
This study evaluated the effect of nano boron nitride (BN) and nano titanium dioxide (TiO2 ) on
some physical, mechanical and thermal properties of WF/PP composites. Polyproplene as a polymer matrix and
wood fl our ...