Ara
Toplam kayıt 51, listelenen: 21-30
Morphological characterization of foamed natural filler-reinforced styrene maleic anhydride (SMA) composites
(Springer, 2014-10-04)
The aim of this study is to investigate the
foaming of styrene maleic anhydride (SMA) matrix composites
with a physical foaming agent, created during the
reactive extrusion of natural fillers and SMA. The effect ...
Thermal analysis of micro- and nano- lignocellulosic reinforced styrene maleic anhydride composite foams
(Taylor & Francis, 2015-03-06)
The aim of this study was to measure the thermal properties of foamed nano/macro filler–reinforced
styrene maleic anhydride (SMA) composites. SMA (66%) as a polymer matrix (10% maleic
anhydride content) and various fillers ...
The effect of mass loss on mechanic properties of heat-treated paulownia wood
(Wood Research, 2009)
In this study, the eff ect of mass loss on mechanic properties of Paulownia (Paulownia
elongata) wood was investigated. For this study, three diff erent temperatures (160, 180, and
200oC) and durations (3, 5, and 7 hours) ...
The effect of treatment time on dimensionally stability, moisture content and mechanical properties of heat treated anatolian chestnut (Castanea sativa Mill.) wood
(Wood Research, 2009)
In this study, the effect of treatment time on dimensional stability, moisture content, and mechanical properties of heat-treated Anatolian chestnut (Castanea sativa Mill.) were investigated. Test specimens were subjected ...
Surface characterization of weathered and heat-treated woodbased composites reinforced by styrene maleic anhydride
(Color Research and Application, 2019-09-20)
The aim of this study was to investigate the effect of heat-treated lignocellulosic filler
on the surface characteristics and decay resistance of the wood flour/styrene maleic
anhydride (SMA) composites. In this study, ...
The effect of using alum mordant in wild cherry bark dyestuff for the production of UV resistant colored paper
(Drewna Industrija, 2019-12-15)
Depending on the use of wood in the forest industry, wood bark is mostly peeled and used as fuel.
The ash and smoke left from the burned bark causes environmental pollution. The most environmentally friendly
method for ...
The effects of adhesive ratio and pressure time on some properties of oriented strand board
(Bioresources, 2011)
This study was carried out to determine the effects of adhesive ratio and pressure time on thickness swelling (TS), internal bond (IB), modulus of rupture (MOR), and modulus of elasticity (MOE) properties of oriented strand ...
The density, compression strength and surface hardness of heat treated hornbeam (carpinus betulus ) wood
(Maderas. Ciencia y tecnología, 2009-02-13)
The heat treatment of wood is an environment-friendly method for wood preservation. The heat
treatment process only uses steam and heat, and no chemicals or agents are applied to the material
during the process. Tests ...
Effect of heat treatment of wild cherry wood on abrasion resistance and withdrawal capacity of screws
(Drvna Industrija, 2015-11-06)
In its wise use, many properties of wood are important. Among these properties, wood abrasion
resistance (AR) and withdrawal capacity of screws (WCS) are deemed to be relatively signifi cant. It is well know
that heat ...
Changes in the chemical structure of thermally treated wood
(Bioresource Technology, 2010)
Changes in the chemical structure of hornbeam and uludag fir woods during thermal treatment were investigated at three temperatures (170, 190, and 210 oC) and three durations (4, 8, and 12 hours). After thermal treatment, ...