Başlık için Orman Fakültesi listeleme
Toplam kayıt 130, listelenen: 73-92
-
Heat treated wood–nylon 6 composites
(Elsevier, 2014-09-03)Heat treatment is a relatively benign modification method that is growing as an industrial process to improve hygroscopicity, dimensional stability and biological resistance of lignocellulosic fillers. There also has ... -
The impact of nanoparticles and moisture content on bonding strength of urea formaldehyde resin adhesive
(Drvna Industrija, 2018)Wood and wood products have been used in different environmental conditions. Moisture content (MC) and relative humidity (RH) are key parameters for these conditions and bonding strength. Nanotechnology has paved the way ... -
The impacts of heat treatment on lap joint shear strength of black pine wood
(Taylor & Francis, 2010-09-02)This study was conducted to determine the impacts of heat treatment on lap shear strength, density, and mass loss of black pine wood. In the study, black pine wood boards bonded with polyurethane were subjected to ... -
Improvement of fire performance of impregnated wood with copper based chemicals
(28th International Conference on Wood Science and Technology, 2017-12-07)Copper is among the most commonly used substances in impregnating industry due to its high toxicity against fungi at last 50 years. Copper-azole (CuA) and ammonical copper quaternary (ACQ) are the most widely used, because ... -
Improving the performance of scotch pine (pinus sylvestris) wood surface
(Northern European Network for Wood Sciences and Engineering, 2015-09-25)In this study, the influence of wood stain (WS) and zinc (Zn) particles applied by a plasma process at atmospheric pressure against UV light was investigated. Scots Pine (Pinus sylvestris L.) specimens were prepared from ... -
The influence of mass loss on the mechanical properties of heat-treated black pine wood
(Wood Research, 2009)Heat has been a method used to dry and modify the properties of wood since ancient times. Nowadays, heat is used as industrial processes for the same reason. Treatment at temperatures above 150°C can change the color of ... -
Influence of micro- and nanonatural fillers on mechanical and physical properties of foamed sma composites
(Taylor & Francis, 2015-03-25)This study is to investigate the reinforcing effects of fillers on mechanical and physical properties of foamed styrene-maleic anhydride (SMA) composites. According to the results, the best foaming was determined for ... -
The influence of thermal treatment on color response of wood materials
(Wiley Periodicals, 2010-08-11)In this study, the influence of thermal treatment on color changes of six different wood materials was investigated. Test specimens were subjected to three different temperatures (160, 180, and 200°C) and durations (3, 5, ... -
Investigating changes in the chemical constituents and dimensional stability of heat-treated hornbeam and Uludag fir wood
(Bioresources, 2011)Changes in chemical constituents and some physical properties such as swelling and water absorption of hornbeam (Carpinus betulus L) and uludag fir (Abies bornmulleriana Mattf.) wood were investigated after heat treatment ... -
Investigation of usage possibilities dyed material from cherry wood bark in color paper production
(International Conference on Agriculture, Food, Veterinary and Pharmacy Sciences, 2017-05-15)Paper can be exposed to external influences such as mechanical, physical and biological depending on place of use. One of these effects is sunshine. When paper exposed to direct or indirect sunlight changes color. Depending ... -
Isıl işlem uygulanmış ladin, karaçam, kayın ve kavak odunlarının korozyon özellikleri
(Kahramanmaras Sutcu Imam University Journal of Engineering Sciences, 2012-10-28)Bu çalışmada, endüstriyel bir fabrikada ısıl işleme tabi tutulan ladin (Picea orientalis), karaçam (Pinus nigra), kayın (Fagus orientalis) ve kavak (Populus deltoides) odunu örneklerinin korozyon özellikleri ve pH değerleri ... -
Karbon birikiminin farklı yöntemlerle hesaplanması; Bartın Orman İşletme Müdürlüğü örneği
(4th International Symposium On Environment And Morals, 2018)Dünyada 1850 sanayileşme devrimine koşut olarak, insan kaynaklı sera gazı olan karbondioksit seviyesi trajik bir şekilde artmaktadır. Çevreyle ilgili temel sorunlara eklenen “Küresel Isınma” tüm Dünya’nın gündeminde yer ... -
Karbon stok değişiminin hesaplanması; Çaycuma örneği
(International Congress on Agriculture and Forestry Research, 2019)İnsan faaliyetlerinin bir sonucu olarak atmosfere salınan sera gazları ve özellikle CO2miktarının artışıyla, Dünya’da bir dengesizlik meydana gelmiştir. En önemli ekolojik problem olan küresel ısınma, iklim ... -
Küre Dağları Milli Parkı köy tasarımı rehberleri (Bartın bölümü)
(Bartın Üniversitesi, 2015) -
Küresel ısınma farkındalığı “Bartın Üniversitesi öğrencileri örneği”
(Bartın Üniversitesi Orman Fakültesi Dergisi, 2018-04-16)Küresel ısınma insan faaliyetleri sonucu gerçekleştiğine göre, küresel ısınma ve iklim değişikliği konusunda yapılacak eğitimler küresel ısınma ile mücadelenin bir ayağıdır. Bu konudaki farkındalık düzeylerinin belirlenmesi, ... -
Mechanical, morphological and thermal properties of nano-boron nitride treated wood materials
(Maderas. Ciencia y Tecnología, 2016)Thermal instability is the one of the most important disadvantages of wood since it begins to decompose at a low temperature (˃110 °C). Many scientists, past and present, have conducted studies aimed at improving the ... -
Morphological characterization of foamed natural filler-reinforced styrene maleic anhydride (SMA) composites
(Springer, 2014-10-04)The aim of this study is to investigate the foaming of styrene maleic anhydride (SMA) matrix composites with a physical foaming agent, created during the reactive extrusion of natural fillers and SMA. The effect ... -
A nano-technological product: An innovative varnish type for wooden surfaces
(Academic Journals, 2008-12-18)In this study, “nanolacke ultraviolet (UV) varnish,” developed by a Turkish dyeing and varnish company and widely accepted as a 21st century technology, has been compared to other conventional varnish types that are widely ... -
Nanocomposites of polypropylene/nano titanium dioxide: effect of loading rates of nano titanium dioxide
(Materials Science, 2016-09-01)TiO2 filled Polypropylene (PP) nanocomposites were prepared with a single screw extruder and then by injection molding of the blends. Water absorption, density, mechanical properties, morphological characterization, FTIR ... -
Natural fillers-filled styrene maleic anhydride copolymer composites
(Wood Research, 2015)The aim of this study was to determine morphological characterization, mechanical properties and thermal stability of natural fillers-filled styrene maleic anhydride (SMA) copolymer composites. SMA and natural fillers ...