Orman Endüstri Mühendisliği Bölümü
Collections in this community
-
Orman Endüstri Mühendisliği Bölümü Diğer Yayınlar Koleksiyonu [21]
Bildiri, Rapor, Açık Ders Kaynakları vb. yayınları içerir -
Orman Endüstri Mühendisliği Bölümü Kitap Koleksiyonu [0]
Orman Endüstri Mühendisliği Bölümü'ne ait kitap çalışmalarını içerir -
Orman Endüstri Mühendisliği Bölümü Makale Koleksiyonu [57]
Orman Endüstri Mühendisliği Bölümü'ne ait makale çalışmalarını içerir
Recent Submissions
-
The effect of using alum mordant in wild cherry bark dyestuff for the production of UV resistant colored paper
(Drewna Industrija, 2019-12-15)Depending on the use of wood in the forest industry, wood bark is mostly peeled and used as fuel. The ash and smoke left from the burned bark causes environmental pollution. The most environmentally friendly method for ... -
Surface characterization of weathered and heat-treated woodbased composites reinforced by styrene maleic anhydride
(Color Research and Application, 2019-09-20)The aim of this study was to investigate the effect of heat-treated lignocellulosic filler on the surface characteristics and decay resistance of the wood flour/styrene maleic anhydride (SMA) composites. In this study, ... -
Accelerated weathering and decay resistance of heat-treated wood reinforced polypropylene composites
(Drvna Industrija, 2019-10-27)The aim of this study was to determine the accelerated weathering and decay resistance of the heattreated wood reinforced polypropylene composites (HT-WPC). Polypropylene (PP) was used as a matrix and the heat-treated wood ... -
Some physical and mechanical properties of maritime pine and poplar exposed to oil-heat treatment
(Turkish Journal of Forestry, 2019-10-01)Oil-heat treatment is an environmentally friendly method to improve dimensional stabilization of wood. In this process, vegetable oil is used as a heating medium in different temperatures and times. In this study, maritime ... -
Su itici maddeler ile kombine edilmiş bakırlı ve borlu bileşiklerin yıkanma özellikleri
(Turkish Journal of Forestry, 2019-10-01)Bu çalışmada, odun koruma endüstrisinde yoğun olarak kullanılan alkali/bakır/kuat (ACQ) ve borik asit (BA) emprenye maddelerinin yıkanma performansları araştırılmıştır. ACQ ve BA maddelerine referans madde olarak mikronize ... -
Characterization and elemental analysis of wood pellets obtained from low-valued types of wood
(Taylor & Francis, 2016)In this study, we compared the quality of wood pellets obtained from several different raw materials, i.e., Rhododendron ponticum (Type 1), Laurus nobilis (Type 2), and Castanea sativa (Type 3). The quality of the wood ... -
Physical, morphological properties and raman spectroscopy of chestnut blight diseased castanea sativa mill. wood
(SCIELO, 2016)In this study, some of the physical and anatomical properties of Chestnut Blight Diseased (CBD) wood were investigated, and the study also included observations using Raman spectroscopy. The objective of these investigations ... -
Mechanical, morphological and thermal properties of nano-boron nitride treated wood materials
(Maderas. Ciencia y Tecnología, 2016)Thermal instability is the one of the most important disadvantages of wood since it begins to decompose at a low temperature (˃110 °C). Many scientists, past and present, have conducted studies aimed at improving the ... -
Nanocomposites of polypropylene/nano titanium dioxide: effect of loading rates of nano titanium dioxide
(Materials Science, 2016-09-01)TiO2 filled Polypropylene (PP) nanocomposites were prepared with a single screw extruder and then by injection molding of the blends. Water absorption, density, mechanical properties, morphological characterization, FTIR ... -
Thermal analysis of micro- and nano- lignocellulosic reinforced styrene maleic anhydride composite foams
(Taylor & Francis, 2015-03-06)The aim of this study was to measure the thermal properties of foamed nano/macro filler–reinforced styrene maleic anhydride (SMA) composites. SMA (66%) as a polymer matrix (10% maleic anhydride content) and various fillers ... -
Morphological characterization of foamed natural filler-reinforced styrene maleic anhydride (SMA) composites
(Springer, 2014-10-04)The aim of this study is to investigate the foaming of styrene maleic anhydride (SMA) matrix composites with a physical foaming agent, created during the reactive extrusion of natural fillers and SMA. The effect ... -
Influence of micro- and nanonatural fillers on mechanical and physical properties of foamed sma composites
(Taylor & Francis, 2015-03-25)This study is to investigate the reinforcing effects of fillers on mechanical and physical properties of foamed styrene-maleic anhydride (SMA) composites. According to the results, the best foaming was determined for ... -
Effect of heat treatment of wild cherry wood on abrasion resistance and withdrawal capacity of screws
(Drvna Industrija, 2015-11-06)In its wise use, many properties of wood are important. Among these properties, wood abrasion resistance (AR) and withdrawal capacity of screws (WCS) are deemed to be relatively signifi cant. It is well know that heat ... -
Natural fillers-filled styrene maleic anhydride copolymer composites
(Wood Research, 2015)The aim of this study was to determine morphological characterization, mechanical properties and thermal stability of natural fillers-filled styrene maleic anhydride (SMA) copolymer composites. SMA and natural fillers ... -
Heat treated wood–nylon 6 composites
(Elsevier, 2014-09-03)Heat treatment is a relatively benign modification method that is growing as an industrial process to improve hygroscopicity, dimensional stability and biological resistance of lignocellulosic fillers. There also has ... -
The effects of adhesive ratio and pressure time on some properties of oriented strand board
(Bioresources, 2011)This study was carried out to determine the effects of adhesive ratio and pressure time on thickness swelling (TS), internal bond (IB), modulus of rupture (MOR), and modulus of elasticity (MOE) properties of oriented strand ... -
Changes in the chemical structure of thermally treated wood
(Bioresource Technology, 2010)Changes in the chemical structure of hornbeam and uludag fir woods during thermal treatment were investigated at three temperatures (170, 190, and 210 oC) and three durations (4, 8, and 12 hours). After thermal treatment, ... -
The effect of heat treatment on some mechanical properties and color changes of Uludag fir wood
(Taylor & Francis, 2010-03-08)In this study, the effects of heat treatment on color, mass loss, compression strength, and hardness of Uludag fir (Abies bornmulleriana Mattf.) were investigated. Wood specimens conditioned at a relative humidity of ... -
The impacts of heat treatment on lap joint shear strength of black pine wood
(Taylor & Francis, 2010-09-02)This study was conducted to determine the impacts of heat treatment on lap shear strength, density, and mass loss of black pine wood. In the study, black pine wood boards bonded with polyurethane were subjected to ... -
The influence of mass loss on the mechanical properties of heat-treated black pine wood
(Wood Research, 2009)Heat has been a method used to dry and modify the properties of wood since ancient times. Nowadays, heat is used as industrial processes for the same reason. Treatment at temperatures above 150°C can change the color of ...
RSS 1.0